Places of Usage
• As a topcoat decorative coating material in jacketing systems,
• Used on interior and exterior plasters.
• It is also suitable for interior use of buildings for decorative purposes.

Features/ Advantages
• Easy to apply, provides excellent adhesion.
• It has a decorative appearance and provides a homogeneous application.
• Wavy appearance caused by improper application of thermal insulation systems can be corrected.
• Water and frost resistant.
• It is resistant to external influences and protects the structure for many years.
• Water vapor permeable, allows the surface to breathe.
• Exterior paints can be applied on it.
• Reduces product consumption with fine grain texture.

Application Directions
a) Surface Preparation:
Minimum 12 hours after the application of primer on the surfaces where the thermal insulation board plaster mortar or thermal insulation board plaster and jacketing primer is applied, N4003 Neroflex Decor Grain and Line Textured application is applied.
b) Product Preparation:
25 kg N4003 Nero Decor, Mineral Textured -White (lllin-Thick) is added into approximately 6 -6.5 liters of clean water and preferably mixed with a low speed mixer so that no lump remains. The prepared mortar is left to mature for 5-1 0 minutes and used by mixing again for 1-2 minutes. The mixture in the container should be consumed within 1,5-2 hours.
c) Application Method:
The material should be applied with a steel trowel and spread over the entire surface of equal thickness. The application thickness should be adjusted to the largest aggregate. Within 10 minutes at the latest, when the material is still wet, make a circular pattern with a plastic trowel to give the plaster a pattern. If the air temperature is high after the application is completed, moisten the surface until the cement sets.

Issues to be Considered
• Do not allow to form the film on the plaster by by applying plastic trowel within 10 minutes at the latest.
• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind. If snowfall or heavy cold is expected in about 1 week after the application, it should not be applied or protection measures should be taken.
• Never add water and powder to the mortar that has expired.
• The product should not be applied on the horizontal surface exposed to rain.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N4003 Nero Decor can only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption
Recommended consumption amount for 1 m2 application; 3,0 - 3,5 kg. This value may vary depending on surface and ambient conditions.

Package
25 kg kraft bags. 
N4003 Nero Decor
Quality Certificates:
Manufactured according to TS 784 7