Places of Usage
• Indoor and outdoors,
• It is used for plastering thermal insulation boards (Expanded polystyrene - EPS and extruded polystyrene - XPS),

Features/ Advantages
• Easy to apply, provides excellent adhesion.
• Resistant to water and frost.
• Not affected by temperature changes.
• Flexible.
• Provides high stability, does not sag and crack.
• Water vapor permeable, allows the surface to breathe.
• Paint can be applied directly on it.

Application Directions
a) Surface Preparation:

The application surface and boards ahould be solid and free from adhesion preventive substances such asdust, oil, tar, pitch, paint, silicone, curing agent, detergent and molding oil. The boards to be plastered must be solid and firmly seated and the gaps between them should be covered with MultiPurpose Polyurethane Foam or the same material.

b) Product Preparation:

25 kg N4002 NERO Thermal Thermal Insulation Board Plaster Mortar - Fib er Added (Thick) is added into approximately 6-7 It of clean water and preferably mixed with a low speed mixer so that no lump remains. The prepared mortar is left to mature for 5-10 minutes and used by mixing again for 1-2 minutes. The mixture in the container should be consumed within 2 hours.

c)Application Method:

At least 24 hours after the doweling of the thermal insulation board, first layer plaster of 2-3 mm thickness is applied on the boards with a trowel. When the applied mortar is still wet, the Plaster Net is pressed from top to bottom and stretched and embed in the mortar. After approximately 6 hours, the surface is moistened and covered with a second layer of plaster (2-3mm thick) and smoothed for painting. To prevent cracking, the net is overlapped by 1 0 cm at the joints. Depending on the weather conditions and application thickness, it is necessary to wait 2-3 days for the paint. If the air temperature is highafter the application is completed, moisten the surface until the cement sets.

Issues to be Considered
• Avoid application at temperatures below +5° C and above+ 35oc_
•Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind. If snowfall or heavy cold is expected in about 1 week after the application, it should not be applied or protection measures should be taken.
• Never add water and powder to the mortar that has expired.
• Be careful not to use boards that have lost their properties by staying in the sun for a long time.

Cleaning of Tools: Tools and equipment used should be cleaned with water after the application. 4002 Thermal can only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption
Recommended amount of consumption for 1 m2 application (1. coat plaster + reinforcing net + 2.
coat plaster application) and 4 mm thickness; 4,0-5,0 kg. This value may vary depending on surface and ambient conditions.

Package 25 kg kraft bags. 
N4002  NERO Thermal
Quality Certificates: Manufactured according to TS EN 13565