N4001 NEROCOAT FIX Thermal Insulation Board Adhesive Mortar (Fiber)
N4001 NEROCOAT FIX
Thermal Insulation Board Adhesive Mortar (Fiber)
It is a fiber-reinforced, thermal insulation adhesive mortar with high flexibility and adhesion strength, breathable, resistant to adverse weather conditions, water and impacts.
Consumption 4-5 kg/m (Varies according to application method. In rockwool applications, it should be 5-6 kg/m2.)
Package 25 kg kraft bags.
N4001 NeroCoat Fix
Quality Certificates: Manufactured according to TS EN 13566
Places of Usage
-
- Indoor and outdoors,
- It is used for bonding thermal insulation boards Expanded polystyrene - EPS and extruded polystyrene - XPS.
Features/ Advantages
-
- Easy to apply, provides excellent adhesion.
- Resistant to water and frost.
- Not affected by temperature changes.
- Flexible.
- Provides high stability, does not sag and crack.
Application Directions
a) Surface Preparation:
The surface should be dry, clean, sound and free of dust, oil, dirt or adhesion preventive materials should be cleaned from the surface and materials such as mortar and cement residues should be scraped. Repair of surface defects with a depth of more than 2 cm should be eliminated with Neroflex Repair Mortar 24 hours before the application. In cases where structural repair mortar is required, Neroflex Structural Repair Mortar should be used.
b) Product Preparation:
25 kg N4001 Nerocoat Fix Thermal Insulation Board Adhesive Mortar is added into 6 - 7 It of clean water and mixed with a low speed mixer in a way that there is no lump. The prepared mortar is rested for 5-10 minutes to mature and used by again mixing for 1-2 minutes. The mixture in the container should be consumed within 2 hours.
c) Application Method:
If there are curvatures on the surface, N4001 Ne rocoat Fix is applied continuously along the four edges of the thermal insulation board and in the middle of the board in three groups. Care should be taken that the adhesive does not overflow the edges of the board. If the surface is very smooth, it can be applied with a 10x10 notched trowel to the back of the board with N4001 Nerocoat Fix chi seling method. During application, it should be en sured that N4001 Nerocoat Fix does not form film on the surface. Insulation boards glued with N4001 Nerocoat Fix should be doweled after a minimum of 24 hours, then the boards should be plastered with Neroflex Thermal Insulation Board Plaster Mortar (Fiber).
Issues to be Considered
- Avoid application at temperatures below +5°C and above+35°C.
- Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind.
- Never add water and powder to the mortar that has expired.
- To prevent heat transfer, place the heat insulation boards as little as possible between them.
- Be careful not to use boards that have lost their properties by staying in the sun for a long time.
Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N4001 Nerocoat Fix can only be removed mechanically from the surfa ce after hardening.
Security Warnings
- S2 Keep out of the reach of children.
- S24/25 Avoid contact with eyes and skin.
- S26 In contact with eye, wash with water and consult a doctor.
- S28 In contact with skin, wash immediately with plenty of water.
- S29 Do not empty into drains.
- S46 If swallowed, consult a doctor immediately and show box or label.
Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.
Consumption 4-5 kg/m (Varies according to application method. In rockwool applications, it should be 5-6 kg/m2.)
Package 25 kg kraft bags.
N4001 NeroCoat Fix
Quality Certificates: Manufactured according to TS EN 13566
Other Products
Export to the Middle East and Europe
Production with Special Production Techniques
Recipes for All Needs
Full Time Secure Shipping
Copyrights © 2024 Neroflex
