Places of Usage
• It is a self-spreading, flowable epoxy casting mortar that can be applied on concrete, stone, mortar, steel, aluminum, asbestos cement, polyester, wood and epoxy based materials.
• It is used in machine foundations, anchoring works, fixing of roadside barriers, support and connection elements, crane rails, bridge supports.
Features/ Advantages
■ High mechanical strength
• Excellent abrasion resistance
• High chemical resistance
• Water impermeability
• Dry in humid environment
• No solvent required.

Application Directions
a) Surface Preparation:
All free and crumb material must be removed from the surface. All oil and dirt on the surface should be cleaned by sandblasting or compressed air spraying. Rusted iron must be removed from the rust with a wire brush or sandblasting.
b) Product Preparation:
Pour component B into component A. Mix with a low speed electric mixer until the mixture in the turbid appearance is completely homogeneous. Then pour the mixture into a suitable container and add component C slowly and continuously, mix for at least 3 minutes until a homogenous and fluent mortar is obtained.
c)Application Method:
After the mixing process is completed, pour the product into the application area and provide enough pressure (15-20 cm) to maintain the movement of the material. Cast on one side. Make sure that the required air outlet is provided. If necessary, the flow of the grout can be assisted by the steel rod. It should be noted that the strength and adhesion values of the product will also change if the mixture ratios change

Issues to be Considered
• During the application of the product, work clothes that comply with occupational health and safety rules should be worn and appropriate glasses and masks should be used.
• After the application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (+ 30° C), rain and frost.
• Before the product is cured and hardened, hands, skin in contact with product should be cleaned with water and detergent.
• In case of contact with eyes, wash immediately with plenty of warm water and detergent and seek medical advice.
• Immediately after application, before hardening, the equipment should be cleaned with thinner. After the product has hardened, it should be
cleaned by mechanical methods.
• It should be noted that the strength and adhesion values of the product will change if the mixture ratios change.
• No primer is used with our product.
Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N7009 Epoksi Grout can only be removed mechanically from the surface after hardening.
Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.
Consumption    2,3 kg/m2 (For 1 mm thickness)
Package   In 15 kg set
N7009 Epoksi Grout
Quality Certificates: Manufactured according to TS EN 1504-3