Places of Usage:
• It is used for bonding ceramics, granite, porcelain ceramics and marble up to 30 m height to the exterior of buildings safely. It is recommended to be supported by mechanical fixing as well as bonding method for application of coating materials from 60x60 cm up to 15 m high and 40x40 cm up to 30 m high on exteriors.
• It gives excellent results in the application of coating materials such as ceramic, natural stone, travertine, decorative brick, granite, porcelain ceramic, clinker, cotto on surfaces such as concrete, plaster, screed horizontally and vertically indoors and outdoors.
• It is used in places like shopping-business centers, hospitals, schools where there is heavy pedestrian and freight traffic.

Features/ Advantages:
• High adhesion strength.
• Thanks to its S2 class flexibility, it is resistant to surface stresses caused by sudden heat changes.
• Resistant to all kinds of climatic conditions.
• Does not slip in vertical surface applications.
• It has long working time.
• Easy to comb.

Application Directions:
a) Surface Preparation:
The surface should be free of residues that prevent adhesion. The surface should be hardened and solid. The defects on the application surface should be corrected with Neroflex Repair Mortar. Neroflex Plaster should be used on anhydrite surfaces. The dusty surface behind the ceramic should be moistened and wiped.
b) Product Preparation:
25 kg Powder should be poured onto 5 It liquid component slowly and should be mixed until a homogeneous mixture is obtained. The mixture should be made with a low speed mixer. 2-3 kg of water should be added to the liquid component. The prepared mortar should be rested for 5-10 minutes to mature. It should be mixed again for 1-2 minutes before application. In order to obtain a better bonding surface, the mortar should be spread on the surface with the flat side of the trowel and then combed with the toothed side of the trowel selected according to the tile size. Combined bonding method should be preferred in exterior applications.
b) Product Preparation:
N1015 Performans 2K layer of 1 mm thickness is applied to the application surface with the flat side of the trowel. N1015 Performans 2K is applied in one direction in such a way that a uniform thickness is obtained with the toothed side of the trowel to an area that can be covered within 30 minutes, open waiting time. For the bonding of tiles or ceramics with different thicknesses, it is recommended to apply 1 mm thick mortar under each tile or ceramic in order to cover the defects on the application surface. When applying tiles or ceramics in place, the tiles or ceramics are floated in the mortar to ensure that they are fully in contact with adhesive mortar.  Application is completed by leaving the recommended joint gap according to the appropriate tile or ceramic size. Neroflex Joint
Fillings should be used to fill the left joint gaps. Joints can be applied after approximately 24 hours.

Issues to be Considered:
• Avoid application at temperatures below +5°C and above +35°C.
• Pay attention to the amount of water added to the mortar. Do not add more water than necessary. Neroflex
• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind.
• Never add water and powder to the mortar that has expired.
• As it is cement based, do not breathe dust, do not contact skin and eyes. For further information refer to the Safety Data Sheet.
• The amount of consumption indicated is general information.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N1015 Performans 2K can only be removed mechanically from the surface after hardening.

Security Warnings:
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage:
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For
long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption: Average 4-5 kg/m2
Package: 25 kg kraft bags. 
                  5 It plastic buckets.
N1015 Performans 2K
Quality Certificates:
Manufactured according to TS EN 12004.
C : Cement based
2 : High performance
T : Reduced slip property
E : Prolonged working time
S2 : Very Flexible