Places of Usage:
• Indoors and outdoors,
• Vertical and horizontal surfaces,
• For adhesion of small size floor and wall ceramic, mosaic and similar materials with water absorption rate above 3%,
• Used for bonding on tiles, ceramics, bathrooms.

Features/ Advantages:
• Has quick setting feature.
• It provides high adhesion strength thanks to polymer added.
• Easy to prepare and apply.
• Does not slip in vertical applications.
• Has long working time.

Application Directions:
a) Surface Preparation:
Take care that the application surface should be solid, dry, carrier, dust-free and clean and at the same time in balance. The surface should be thoroughly cleaned of all kinds of oil, grease, rust and paraffin residues that will weaken the adherence and there should be no loose particles on the surface. Damaged surfaces with a depth of 5 to 20 mm should be repaired with Neroflex Repair Mortars two days in advance. If the temperature of the surface to be applied is above + 25° C, the surface should be moistened.
b) Product Preparation:
The water in appropriate amount is poured into the clean mixing vessel with a scale. N1020 Serafast is added slowly and mixed with a 400-600 rpm mixer for 3-5 minutes until a uniform and lump-free mixture is obtained. After resting for 3-5 minutes and mixing again for 30 seconds, the material is ready for use.
c)Application Method:
N1020 Serafast layer of 1 mm thickness is applied to the application surface with the flat side of the trowel. N1020 Serafast is applied in one direction in such a way that a uniform thickness is obtained with the toothed side of the trowel to an area that can be covered within 30 minutes, open waiting time. For the bonding of tiles or ceramics with different thicknesses, it is recommended to apply 1 mm thick mortar under each tile or ceramic in order to cover the defects on the application surface. When applying tiles or ceramics in place, the tiles or ceramics are floated in the mortar to ensure that the N1020 Serafast is fully in contact.  Application is completed by leaving the recommended joint gap according to the appropriate tile or ceramic size. Neroflex Joint Fillings should be used to fill the left joint gaps. Joints can be applied after approximately 24 hours.
Issues to be Considered:
• Avoid application at temperatures below +5° C and above+ 35° C.
• Pay attention to the amount of water added to the mortar. Do not add more water than necessary.
• Avoid application in areas that are frozen at risk of freezing within 24 hours or exposed to direct sun and wind.
• Never add water and powder to the mortar that has expired.
• As it is cement based, do not breathe dust do not contact skin and eyes. For further information refer to the Safety Data Sheet.
• The amount of consumption indicated is general information.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N1020 Serafast can only be removed mechanically from the surface after hardening.

Security Warnings:
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage:
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For
long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption: Average 4-5 kg/m2
Package: In 20 kg kraft bags.

N1020 Serafast C1FTE
Quality Certificates:
Manufactured according to TS EN 1 2004.
C :Cement based
1 : Normal hardening (Standard performance)
F : Quick setting
T: Reduced slip property
E: Prolonged working time