Places of Usage
• For the restoration or strengthening of historical masonry structures,
• Repair or reconstruction of masonry domes and vaults,
• Forming the foundation for existing masonry walls,
• For filling large gaps.
• Repair works for the recovery of lost bearing capacity of stone, brick or alternate walls,
• In the formation of stone, brick or alternate attachments to be made for the purpose of repair or strengthened.
• For placing carbon rods in wall joints.

Features/ Advantages
• Easy to apply.
• Does not contain cement.
• High adhesion strength.
• High mechanical strength.
• High efflorescence resistance.
• High water vapor permeability, breathable,
• Easy and fast application.
• Free of water-soluble salts.
• Low capillary water absorption.

Application Directions
a) Surface Preparation:
Surfaces must be clean, smooth, sound, free of all kinds of dust, oil, dirt, rust, melding oil, detergent, etc. adhesion preventive materials and residues. Weak parts on the surface must be removed. Absorbent surfaces should be pre-wetted, but no puddles remain.
b) Product Preparation:
The required amount of water (5,50 It water for 25kg kraft sack) is put into a clean mixing container with the help of the scale and N7005-02 NERO RESTOREX is added slowly and mixed with a 400-500 rpm mixer for about 4 minutes.
c)Application Method:
The prepared mortar is applied to the previously moistened surface with a trowel. In applications where the application will be made in more than one coat, after the previous coat has hardened, the application should be made such that each coat is at most 5 cm thick. The previous coat must be moistened before the new coat is applied. In screed and concrete-like applications, 30 - 35% by weight clean aggregate can be added to the fresh
mortar with grain size ranging from 5-20 mm.

Issues to be Considered
• Avoid application at temperatures below +5° C and above+ 35° C.
• Do not add foreign materials such as lime, cement, sand and plaster externally into the material.
• Pay attention to the amount of water added to the mortar. Do not add more water than necessary. Excess water added to the mortar will cause cracking and easy wear.
• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind. If snow or heavy cold is expected within about 1 week after application, no application or protection measures should be taken.
• Ensure that the ambient and ground temperature do not fall below the minimum permissible temperature for the material to cure.
• Never add water and powder to the mortar that has expired.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N7005-02 NERO RESTOREX can only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption
Mixture Density (kg/It): 1, 90
1 cm/1 m2 Powder consumption (kg): 15
Amount of mixing water (liters): 5,5

Package
25 kg kraft bags. 
N7005-02 NERO RESTOREX
Quality Certificates:
Manufactured according to TS EN 1504-3