Places of Usage
• Stone and brick laying works,
• Repair or strengthening of historical masonry structures,
• Repair of cracks in masonry domes and vaults,
• For stone, brick and wall laying works of existing historical buildings.
• As binder in the preparation of khorasan mortar to be used in joint manufacturing.

Features/ Advantages
• Easy to apply.
• Does not contain cement.
• High adhesion strength.
• Breathable, high water vapor permeability.
• It allows the production of mortar with different properties compatible with the historical texture.
• Cooked at low temperatures by conventional methods.

Application Directions
a) Surface Preparation:
Surfaces must be clean, smooth, sound, free of all kinds of dust, oil, dirt, rust, molding oil, detergent, etc. adhesion preventive materials. Weak parts on the surface must be removed. The surfaces to be repaired and plastered of historical masonry structures should be solid, dust-free and clean. The surface should be thoroughly cleaned from all kinds of oil, grease, rust, etc. that will weaken the adherence. The wall surface to be applied must be pre-moistened to improve the adhesion and setting time of the mortar. If there is water leakage on the surface, it should be closed with a suitable plug and the water should be drained.
b) Mixture:
The required amount of water is put into a clean mixing bucket with the help of the scale and Teknorep Hydraulic Lime is added slowly and mixed with a 400-500 speed mixer for about 4 minutes.
c)Application Method:
The prepared mortar thickness should be 1 - 3 cm in one layer and applied on the whole surface with the same thickness with a trowel. At least 24 hours should be allowed for intercoat applications and the previous coat should be moistened before the second coat application. Especially in hot, dry and windy environments, the mortar should be protected against rapid evaporation for 24 - 48 hours.

Issues to be Considered
• Avoid application at temperatures below +5°C and above+ 35° C.
• Do not add foreign materials such as lime, cement, sand and plaster externally into the material.
• Pay attention to the amount of water added to the mortar. Do not add more water than necessary.
• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind. If snow or heavy cold is expected within about 1 week after application, no application or protection measures should be taken.
• Ensure that the ambient and floor temperature do not fall below the minimum permissible temperature for the material to cure.
• Never add water and powder to the mortar that has expired.

Cleaning of Tools: Tools and equipment used should be cleaned with water after the application. N7005-01 NERO RESTOREX can only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediatelyand show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption Variable according to the Khorasan Mortar.

Package 25 kg kraft bags.