Places of Usage:
• It is used in; Indoor and outdoor,
• Horizontal and vertical applications,
• Water tanks and swimming pools (provided that they are covered),
• Basic curtain insulation, retaining walls and basement insulation,
• Insulation of terrace roofs (provided that they are covered),
• Cisterns, irrigation channels, manholes, concrete pipes,
• Wet areas such as bathrooms, kitchens and balconies,
• Facilities such as hot springs, Turkish baths,
• Insulation of flower heads,
• Bonding ceramic, granite and coating materials.

Features/ Advantages:
• Easily applied on horizontal and vertical surfaces by brush, roller, trowel or spraying machine.
• Provides seamless and jointless waterproofing.
• Provides high performance water impermeability.
• It is elastic, does not shrink and does not crack.
• It is water vapor permeable and allows concrete to breathe.
• Non-toxic, ideal for drinking water tanks.
• Due to its flexibility and high adhesion, it forms an excellent insulation layer under ceramic and screed.
• Protects concrete surfaces from carbonation and chlorid.

Application Directions
a) Surface Preparation:
It should be ensured that the cement-based surfaces in contact with water are solid, dry, carrier, dust-free and clean and at the same time in balance. The surface should be thoroughly cleaned of any oil, grease, rust and paraffin residues that may weaken the adherence and there should be no loose particles on the surface. Iron and wooden wedges on the surface should be removed and if
any, active water leakages and gaps should be filled with Neroflex Sealant Mortar or Structural Repair Mortar, and corners and edges should be chamfered at least 4 cm radius. Application surface is wet and wait until the application surface is wet and dry/wet. If the coating material loses water immediately and becomes matt, it is understood that the surface is not sufficiently wetted or dries quickly. In such cases, when the air is hot or the materials remain in the wind, only 10% of component B can be added to the mixed material for the first layer.
b) Product Preparation:
Liquid component B (N3009-01 Elastico Plus 2K) is poured into a clean application bucket and powder component A (N3009-01 Elastico Plus 2K) is added slowly and they are mixed with a 400-600 rpm mixer for 3-5 minutes until a homogenous and lump-free mixture is obtained. After resting for 3-5 minutes and mixing again for 30 seconds, the material is ready for use.
c)Application Method:
Prepared N3009-01 Elastico Plus 2K mixture is applied in two or three layers with the help of a Thora brush. The direction of brush application on each layer should be perpendicular to each other. Waiting time between coats varies according to ambient conditions.

Issues to be Considered:
• Avoid application at temperatures below +5° C and above+ 35° C.
• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind.
• Do not add water to the mixture externally.
• Always powder component should be added to the liquid component.
• The wet film thickness during application should not exceed 2 mm for one coat.

Cleaning of Tools:
Tools and equipment used should be cleaned wİth water after the application. 3009-01 Elastİco Plus 2K can only be removed mechanically from the surface after hardening.

Security Warnings:
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage:
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment
should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption:
First layer consumption: 1,50 kg/m2 mixture
Second layer consumption: 1,50 kg/m2 mixture
Third layer consumption: 1,00 kg/m2 mixture

Package:
Component A: In 20 kg kraft bags.
Component B: In 10 It plastic jerrycans.
N3009-01 Elastico Plus 2K
Quality Certificates:
Manufactured according to TS EN 1 504-2