Places of Usage:
• Internal and external,
• Water tanks, swimming and ornamental pools,
• Sealing pits, silos,
• Bare concrete, cupola insulations,
• Foundation walls, retaining and curtain walls,
• Precise results are obtained in wet areas such as foundations and bridges, kitchens, balconies, terraces, bathrooms, WC, in all areas where water and moisture impermeability is desired.

Features/ Advantages:
• Economic
• It precisely provides water and moisture impermeability, prevents the corrosion of the reinforcement in the concrete structure, does not adversely affect the strength of the carrier systems, on the contrary, it has the property of increasing the strength.

Application Directions:
a) Grouting Mortar:
According to the proportions specified in the dosage table, the sieved sand is discharged to a clean surface. 3003 izo «;;im is poured on sand and mixed well with a shovel. Cement is added to this admixture and continue to mix. Enough water is added and it is became mortar and left rest for about 30 minutes. 12 shovels are taken from the matured mortar and diluted in a container until it reaches a dark buttermilk consistency. The grouting obtained is applied to the floor with a brush or broom. It is thrown with a grouting spreading machine on vertical surfaces.
b) Screed and Lime-Free Plasters:
N3003 izocim is mixed well with coarse sand according to the ratios stated in the dosage table. Mixing is continued by adding cement to the admixture. Enough water is added and it is became mortar. Wooden trowel and sponge should be used for leveling the screed, never polishing with steel trowel.
c) Concrete:
For concrete walls and foundation, 30 kg of N3003
izocim is added into 1 m3 of concrete. If the mixtures will be mixed with a mixer in concrete manufacturing; N3003 izocim is added directly to the mixer and mixed for 5 minutes.

Issues to be Considered:
• Mixing order must be strictly followed in the preparation of N3003 izocim mortar.
• Before the application of screed with N3003 izocim, the surface of the concrete should be cleaned from mortar, etc. and the surface should be washed with water
• If the application of screed with N3003 izocim is to be done on grouting, it is recommended to make this screed immediately after the grouting application and wet the surface with water when it starts to dry. Particular attention should be paid to irrigation in summer months.

Cleaning of Tools:
Tools and equipment used should.be cleaned with water after the application. N3003 izocim can only be removed mechanically from the surface after hardening.

Security Warnings:
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains .
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage:
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.
Consumption:
Varies by application area. Contact Neroflex Technical Service according to the intended use.

Package:  30 kg kraft bags.