Places of Usage
• Used indoors and outdoors, on black surfaces, on walls and ceilings to smooth surfaces before painting.

Features/ Advantages
• Provides aesthetic appearance.
• Prepares the surface for painting.
• As it provides high adherence with the surface, does not spill, bond strength is high.
• High performance, does not crack.
• Easy to prepare and apply.

Application Directions
a) Surface Preparation:
Before applying N5003 PLASTER Art S, cement based plaster should be applied on the surface. The surface should be dry, clean, sound and free of dust, oil, dirt or adhesion preventive materials should be cleaned from the surface and materials such as mortar and cement residues should be scraped. Application surface should be moistened with water if necessary. After the surface cleaning, the surface should be primed with Neroflex primer as a single layer to increase the adhesion strength and balance the surface absorbency and should be allowed to dry for 1-2 hours.
b) Product Preparation:
20 kg N5003 PLASTER Siva Art S (White) is slowly added into approximately 6.5 - 7.5 liters of clean water and mixed with a low speed mixer until no lumps remain. The prepared mortar is rested for 5-1 0 minutes to mature and mixed again for 1-2 minutes. The mixture in the container should be consumed within 2-3 hours.
c)Application Method:
Application should be performed on all surfaces with equal thickness with the help of steel trowel. After the plaster is discharged its water, the surface should be clovered and the final corrections should be made with a damp sponge.
If a smooth surface cannot be obtained when completely dry, sanding should be applied where necessary. Application thickness should be between 1-3 mm in one coat.  Application Recommendations: After application, the surface should be moistened for 2-3 days. After the full drying time, sanding should be done. It should not be applied on surfaces where paint, ready colored plaster, rough rendering or siding has been applied.

Issues to be Considered
• Avoid application at temperatures below +5° C and above+ 35° C.
• Do not add foreign materials such as lime, cement, sand and gypsum into the material.
• Pay attention to the amount of water added to the mortar. Do not add more water than necessary.
• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind. If snowfall or severe cold is expected within about one week after application, no application should be performed or protection measures should be taken.
• Never add water and powder to the mortar that has expired.
•Do not use outdoors as the product is formulated for indoor use.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N5003 PLASTER ART S only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.
Consumption
The recommended amount of consumption for 1 mm thickness at 1 m2; 2,25 - 2,75 kg. This value may vary depending on surface and ambient conditions.
Package 20 kg kraft bags. 
N5003 PLASTER ART S
Quality Certificates:
Manufactured according to TS EN 998-1 (GP)