Places of Usage
• Indoor and outdoor,
• Horizontal and vertical applications,
• To increase adherence before applying decorative plaster mortar on the thermal insulation board plastering mortars,
• As a primer before application on old surfaces,
• It is applied under all cement based interior and exterior coating materials.

Features/ Advantages
• It provides high adherence between application surface and coating mortar.
• It is applied before the cement based coatings to be made on absorbent surfaces and prevents rapid water loss of the mortar.
• It provides resistance against moisture.
• Occlusive.
• Ready to use, easy and quick to apply.
• Water-based, odorless, can be safely used indoors.
• It provides ease of application with its white color in heat insulation applications.

Application Directions
a) Surface Preparation:
The application surface should be cured. The application surface should be cleaned from dust, oil, tar, pitch, paint, silicone, curing material, detergent and molding oil.
b) Application Method:
N6004 Primer KA is a ready to use primer. Mix well before use and apply a single coat to the surface with a brush or roller. If necessary, it can be diluted with a maximum of 5% by weight of clean water. The drying time of the product is approximately 6 hours.

Issues to be Considered
• Refer to the Safety Data Sheet for information.
• The specified consumption is for general information purposes. It may vary depending on application conditions and surface properties.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N6004 Primer KA can only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week.

Consumption:100-150 kg/m2 for one coat
Package: In 20 kg plastic buckets.
N6004 Primer KA
Quality Certificates:
Manufactured according to TS 5808