Places of Usage
• Indoors-outdoors, vertical and horizontal applications,
• Outdoors, coatings such as ceramic, glazed press bricks, natural and composite stone,
• Indoors, on application by priming nonabsorbent surfaces such as PVC and metal whose surface is sanded, adhered to the floor strongly,
• Providing excellent adherence on bright exposed concrete surfaces and before the application of repair mortar used for cosmetic purposes,
• In order to extend the processing time of leveling screed and other similar screeds, increase adherence to the ground and minimize air bubbles
• As a primer material before plastering or ceramic bonding works on wood particleboard surfaces indoors.

Features/ Advantages
• It increases the adhesion strength by creating a rough surface for bonding ceramic on smooth and bright floors.
• It provides better adhesion of the ceramic adhesive to the surface by ensuring that the dusty parts on the surfaces adhere to the surface.
• Ready to use. It can be applied by brush or roller.
• Solvent free. Odorless. It does not harm human and environmental health.

Application Directions
a) Surface Preparation:
The application surface must be solid, dry, carrier, dust-free and clean and at the same time in its balance. The surface should be thoroughly cleaned of all kinds of oil, grease, rust and paraffin residues that will weaken the adherence and there should be no loose particles on the surface.
b) Product Preparation:
N6002 Primer DG is mixed with 400-600 rpm mixer for 3-5 minutes until a uniform mixture is achieved.
c)Application Method:
Use a post roll or a small porous coral roll as a primer tool, provided that it does not exceed the maximum consumption. Do not allow to form ponding by distributing the material evenly. Thickness should not exceed 200 microns in each coat application. When the primer is dry, a yellowish, unscratchable and sandy film layer is obtained. Application is performed on the film layer formed.

Issues to be Considered
• N6002 Primer DG is not suitable for structures in continuous water.
• In N6002 Primer DG application, if the ambient and surface temperature is below +5°C or above + 30° C, suitable temperatures should be waited.
• Avoid contamination of the primer during and after application.

Cleaning of Tools:
Tools and equipment used should be cleaned with water after the application. N6002 Primer DG can only be removed mechanically from the surface after hardening.

Security Warnings
• S2 Keep out of the reach of children.
• S24/25 Avoid contact with eyes and skin.
• S26 In contact with eye, wash with water and consult a doctor.
• S28 In contact with skin, wash immediately with plenty of water.
• S29 Do not empty into drains.
• S46 If swallowed, consult a doctor immediately and show box or label.

Storage
It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditions are met. Opened packages should be kept
tightly closed and stored under proper storage conditions and should be used within one week.

Consumption
Depending on surface absorbency and roughness, it is approximately 120-180 gr/m2.

Package
In 12 kg, 3,5 kg, 1 kg plastic buckets.
N6002 Primer DG
Quality Certificates:
Manufactured according to TS EN 1504-2