Places of Usage

It is designed to be used in applications where the floor is exposed to medium and heavy traffic, to provide permanence and when dust-free surfaces are required. It will improve and increase the performance of all concrete surfaces.

• In workshops,

• In energy stations,

  • In garages,

  • In the park,

• In warehouses,

  • Loading ramps,

  • In Factory

• In shipyards,

• In aircraft hangars,

• In car wash places,

  • Used on helicopter tracks.

Features / Advantages

• • Easy to apply on newly polished floor concrete.

  • Thanks to the modified polymers in it, it incorporates the water of the slab concrete to which it is applied and forms a monolithic structure with concrete after finishing.

  • Does not oxidize.

  • Applied surface is 4 to 6 times more resistant to abrasion than normal concrete surface.

  • Contains corundum aggregate with special granulometric grain size.

  • Resistant to freeze- thaw cycle.

  • Resistant to flaking effect caused by antifreeze salts.

Application Directions

a) Surface Preparation:

N8001 Nero Floor K If is to be applied on old concrete, at least 7.5 cm thick C 25 concrete must be poured. Use Epoxy Surface Primer or Latex to increase adherence and adhesion between new concrete and old concrete. The concrete to be applied must be wet enough to absorb the moisture that 8001 Nero Floor K needs. The degree of wetness of the surface is extremely important. If the surface is too wet, 8001 Nero Floor K will disappear within the thickness of the concrete itself and lose its effectiveness. If the surface is too dry, the product will not bond to the surface and the result will be negative.

b} Application Method:

Depending on the size of the floor, 4 - 5 m wide anos are placed as one full and one empty. Where necessary, mesh steel is placed in the anodes and the leveling process is completed. N8001 Nero Floor K should be spread on both sides of the anos in order to get the best distribution on the surface. Concrete is gauged after casting, and it is ensured that it is settled with vibrating gauge application. When the concrete is set up with a foot, the footprint remains at a depth of 2-3 mm at most, and 1/2 of N8001 Nero Floor K is spread evenly by hand or by mechanical spreading machine. It is expected that the material will absorb the water of the concrete, moisten and get a dark color. Make sure the color is equal on all sides of the floor. With trowel, material is fed to the ground thoroughly and integration is provided. A quantity of material is sprinkled onto the edges of the ano and dilatation joints, which are under the highest load, in a strip of 8 cm and fed with a trowel. The remaining 1 /2 of the material is spread by sprinkling on the ground, it is expected to get a dark color by moistening and fed to the ground with a trowel. When the surface is hard enough to walk, polishing1 is performed with steel trowel (helicopter).

c) Hardening:

After application, Neroflex Curing agent should be used for curing of concrete.

d)Joint Cutting:

After the concrete is poured, joint cutting should be done within 2-3 days at the latest. After placing Neroflex Polyethylene Joint Sealant into the joint gaps, the remaining gaps should be filled with the appropriate MS, hybrid or polyurethane mastics of Neroflex

Issues to be Considered

• Avoid application at temperatures below +5°C and above+35°C.

• Avoid application in areas that are frozen, at risk of freezing within 24 hours or exposed to direct sun and wind.

• Do not perform too much polishing, the product should not be thrown away during application to prevent the quartz aggregate from separating from the cement.

• Before application of N8001 Nero Floor Q, the surface should not be polished with a steel trowel or tray.

• In proper applications, the ambient humidity is between 40 and 80% relative humidity. Low rela­ tive humidity may cause efflorescence on the sur­ face, high relative humidity may cause sweating, slower curing and hardening, and may require pro­ longed application.

Cleaning of Tools:

Tools and equipment used should be cleaned with water after the application. N8001 Nero Floor K can only be removed mechanically from the surfa­ ce after hardening.

Security Warnings

• S2 Keep out of the reach of children.

• S24/25 Avoid contact with eyes and skin.

• S26 In contact with eye, wash with water and consult a doctor.

• S28 In contact with skin, wash immediately with plenty of water.

• S29 Do not empty into drains.

• S46 If swallowed, consult a doctor immediately and show box or label.

Storage

It should be stored in unopened original package in a cool and dry environment by protecting from frost. For short-term storage, maximum 3 pallets should be placed over and over and the shipment should be made with first in first out system. For long-term storage, pallets should not be placed over and over. It can be stored for 12 months from the date of production if proper storage conditi­ ons are met. Opened packages should be kept tightly closed and stored under proper storage conditions and should be used within one week

Consumption         Depending on the intended use and traffic load; 4-8 kg/m2 , In light applications less than 7 kg / m2 should be used.

Package 25 kg kraft bags. 

8001-04/05/06 Nero Floor K       

Quality Certificates:                                                                                                                                                                         

Manufactured according to TS EN 13813